You are here: Home / charge ft foot to paint iron fence

charge ft foot to paint iron fence

  • For a basic project in zip code 47474 with 125 square feet, the cost to Paint a Fence starts at $1.53 - $2.84 per square foot*. Because job specific configurations .

  • Related Sites: WPC decking maintenance and cleaning If the damaged WPC decking wear layer will make the floor .

  • See the average cost of a wrought iron fencing job. . fencing project is between $2,800 and $4,100; The average cost per linear foot is $25 - .

  • HomeAdvisor's Wrought Iron Fence Repair Cost Guide lists price information on fixing iron . Once the rust inhibitor has set, paint can be applied to the fencing.

  • Average cost to paint a board fence is about $4.58 per foot (360 feet; scraped and painted one coat). Find here detailed information about board fence painting .

  • Average cost to re-paint a picket fence is about $2.11 per foot (360 feet; material, labor and equipment one coat). Find here detailed information about picket .

  • Q. I am also getting ready to paint an iron fence and gate. . The paints require mixing with a hardener and can cost up to $100/gallon but they are well worth it. .. RFQ: Have approximately 400 ft of wrought iron fence including gates that .

  • How much a wrought iron fence should cost. . wrought iron fence panels can be $30-$300 or more per foot, depending on local rates and the . Number of Feet:

  • Paint prevents iron from rust, but the fence has to be painted each two . The total cost for a standard 4' tall aluminium fence that is 50 feet in .

  • The cost of hiring a professional to install your fence can vary . Wood fences can be painted to match your house or complement your landscape design. . fence length of 200 linear feet, here's what you can expect to spend:

  • The cost to fix a metal fence is on average $310 and it is largely . To correct this, your fence will need to be painted by an exterior painter at a rate . Keep in mind that for large sections of damaged fencing - 50-feet or above .

  • Give me the lowest cost and the average cost & using what kind of wood. The fence would be about 60 to 70 feet long. . Normal lumber can also be used it has to be painted before or immediately after installing the fence.

  • Professional installation typically costs about $10 – $12 per linear foot. . Aluminum fencing is designed to mimic the decorative iron fencing used years . Pros charge about $10 per ft. to install aluminum and steel fences, and $10 and up . Be careful not to scratch off the paint during installation or the steel can rust (if you .

  • $14.65 per linear foot (4 ft fence) (Range: $13.23 - $16.07) . Cost of Wrought Iron Fence Installation in Dallas, Texas . Excludes gates, painting, or staining.

Before Article: construction wall panel in canada

Next Article: products to use for outdoor patio flooring